220V Mini Relay Receiver Wireless Smart Switch RF 433Mhz Wall Panel Switch with Remote Control Wiring-free Panel Lighting<br> Product parameters:<br> Working voltage: AC 90-250V 50/60Hz<br> Load current: ≤10A, load power: 1100W<br> Standby current: 3.6mA5mA<br> RF frequency: 433MHz<br> RF working mode: superheterodyne reception<br> Receive sensitivity: >97dbm<br> Remote control receiving distance: more than 50 meters in open space<br> Decoding method: MCU software decoding;<br> Modulation method: ASK (anti-interference, strong transmission performance)<br> The number of remote controllers that can be stored: 20<br> Support remote control type: intelligent learning type 1527 learning code, 2262 fixed code (customizable rolling code);<br> Output type: 1-way relay switch signal, with load current less than 10A;<br> A variety of working modes: jog, self-locking, interlocking, delay off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light-on function when incoming calls;<br> Working environment: -2080.<br> Color: black, white<br> Wiring method: fixed terminal<br> Output wiring type: neutral wire, live wire<br> Specifications:<br> About Working mode:<br> [Jog mode]Press the remote control and do not release the line to power on, release the remote control line to disconnect;<br> [Self-locking mode]Press the remote control line to power on, and press the remote control again to disconnect the line;<br> [Interlock mode]Press one of the buttons on the remote control (such as the A button), the line is powered on, and then press another button on the remote control (such as the B button) to disconnect;<br> [Jog delay off mode]Press the remote control line to power on, release the remote control to start timing, and automatically disconnect the line after 5 seconds, 10 seconds, 15 seconds, 20 seconds (4th gear);<br> [The function of turning on the lights for incoming calls]That is, the whole line automatically pulls in after power is supplied, also known as the function of turning on the lights for incoming calls.<br> Package Included:<br> 1 x 433Mhz Receiver Module<br> 1 x Feel free to stick the remote control<br> (optional)<br> Notes:<br> 1. Do not operate with power on, you should turn off the power first to operate, and use it after the test is confirm