220V Digital Temperature Controller Thermostat Socket Heating Cooling with Sensor, LCD Temperature Controller Socket for Fridge Incubator Greenhouse F

【Relay Output, Easy to Use】No wires required, just plug the device into this Temperature Controller Thermostat Socket and set the parameters, it will work as programmed. Feed: 230 V AC; Exit: 16A/230V max. The product comes with a 3m long probe for your convenience.【Temperature control function with ±1% accuracy】 Temperature control range: -40℃~120℃. Set start temperature and stop temperature, it will control heater or cooler to operate as programmed. (Start temperature is higher than Stop temperature, cooling; Start temperature is lower than Stop temperature, heating). This thermostat socket also supports temperature calibration.【Timing Function】This temperature controller socket has the functions of cycle timing and countdown. You can choose cycle timer mode to control the device to cycle, or choose other countdown modes to turn the device on or off. Adjustment range: 0~99 hours 59 minutes. Please note that the temperature control function and the timing function cannot be used at the same time.【More functions】5 modes to choose from (temperature control mode, F01 cycle timer mode, F02 count-up mode) countdown ON, F03 Countdown mode OFF, F04 Countdown ON and countdown OFF). Large LCD screen. Temperature calibration. Reset function. Data storage function that all set parameters can be saved after power off. heating, refrigerator, home brew, vivarium, fermentation, heating mat and other temperature controlled systems. It can also be used as a timer for cycle timing and countdown.<br> Note: The data are all manual measurement, please allow 1-3cm error, due to the difference of light and display, there will be some color difference, depending on the physical item received.