["Description:\r\n\r\nFeatures:\r\nbrand new and high quality.\r\nOutput State:\r\nIt is adjusted by the Jumper on the Receiver Board,\r\n(before you change it .you need turn OFF the power. Until you have changed it, then turn ON the power again, or the state will not be changed)\r\n \r\nA: Momentary-----------Put the Jumper on “for T&G”.\r\nB: Toggle------------put the Jumper on “for M&G”.\r\nC: Latched------------- Take way the Jumper or put the Jumper on any 1 pin.\r\n \r\nMomentary:\r\n- Press the Transmitter button A, the receiver relay A is ON.\r\n- Release button A; the receiver relay A is OFF.\r\n\r\nToggle:\r\n- Press transmitter button A for 1 for time, the receiver relay A is ON.\r\n- Press button A again, the receiver relay A is OFF.\r\n \r\nLatched:\r\n- Press transmitter button A, the receiver relay A is ON.\r\n- Press transmitter button B, the relay A OFF.\r\n\r\nLearning Method:\r\nInput AC 220V for the Receiver.\r\n- Press the Learning Button until the Led indicator ON. \r\n- Then press transmitter, the Led indicator flash fast, it mean learning successfully.\r\n\r\nClearing Code:\r\n- Keeping press the Learning Button on the receiver until the LED indicator ON and flash fast, it means the code have been cleared successfully.\r\n\r\nSpecifications:\r\nMaterial: Plastic + Metal\r\nColor: Black\r\nSize: (Approx.) \r\n Transmitter: 50×38×11mm/1.97×1.50×0.43in\r\n Receiver: 80×38×21mm/3.15×1.50×0.83in\r\nType: 1#: 315MHz; 2#: 433MHz (Optional)\r\nWorking Voltage: AC 220V ± 10%\r\nMax Load: 10A Relay\r\nResistive load: ≤8A\r\nInductive load: ≤3A\r\nChannel: 1CH\r\nWorking Frequency: 315MHz/433MHz (Optional)\r\nReceiver sensitivity: -105dB\r\nWorking temperature: -10℃～+60℃\r\nOutput way: Momentary, Toggle, Latched Adjusted by Jumper \r\nCode type: Learning code add controller by the Learning Button on the receiver\r\nQuantity: 1 Set (other accessories demo in the picture is not included)\r\n\r\nNote: \r\n1.Transition: 1cm=10mm=0.39inch\r\n2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\r\n3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\r\n\r\nPackage includes:\r\n2 X Remote Control Switch Transmitter (No retail package)\r\n1 X Remote Receiver Module (include for Shell)"]