1The micro motor adopts allmetal gears, which is wearresistant and runs smoothly and without noise. 2Red copper coil stator and rotor, the deceleration resistance has increased conductivity, so that the motor torsion is increased. 3High temperature grease lubricating oil has the characteristics of low friction, noise reduction, and slow temperature rise. 4Using high-quality magnetic tiles to work, higher efficiency and less dynamic loss. 5Widely used in micro-machines in various industries, such as household appliances, CNC machine tools, electronic manufacturing equipment, etc. Item Type: Micro Motor Model: XD-60KTYZ + bracket Material: Copper Output Shaft Size: Approx. 7 x 19mm / 0.3 x 0.7in Protection Level: IP20 Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20M Insulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, apply 50Hz or 60Hz between the coil shells for one second at a voltage of 1800V without abnormality. Temperature Rise: When the gearbox or equivalent heat sink is installed, and the rated operation is performed under normal temperature and humidity, it is normal to measure the temperature rise of the coil by the resistance method to 75-80. Insulation Class: E class (130) Operating Environment Temperature: Motor: -10~+40 (no icing) Use Environment Humidity: 85% or less (no condensation) Whether Support CW and CCW: Yes Whether Support Speed Regulation: No ModelVoltage (V)Speed (rpm/min)Normal Torsion (kgfcm) Long Time WorkLarge Torsion (kgfcm) Intermittent WorkPower (W) XD60KTYZAC220V2.5385014 5283414 10202614 15152014 AC110V2.5385014 5283414 10202614 15152014 1 x Micro Motor 1 x Bracket