Features: Both the inside and outside of the flat edge square are 90 degree angles Used for right angle measurement and can measure the vertical deviation of the inner and outer corners of the workpiece. It is an industrial and professional tool for assembly and platform operation. All faces and edges are ground and lapped for straightness and parallelism. The flat edge square and the crossbar are precisely ground and polished. There is a groove milled in the inner corner to provide clearance for burrs and debris. Level 2 square is especially suitable for workshop workers to produce self-tests. Specification: Condition: 100 percent Brand New Item Type: Right Angle Ruler Material: Steel Accuracy Level: 2 Optional Size: Approx. 75 x 50mm / 3 x 2in, Approx. 100 x 70mm / 3.9 x 2.8in Package List: 1 x Right Angle Ruler Note: 1. Please allow slight error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.1Both the inside and outside of the Flat Edge Square are 90 degree angles. 2It is an industrial and professional tool for assembly and platform operation. 3All faces and edges are ground and lapped for straightness and parallelism. 4There is a groove milled in the inner corner to provide clearance for burrs and debris. 5Level 2 square is especially suitable for workshop workers to produce self-tests.