Two Parallel Cores: The H7's main processor is the dual-core STM32H747, including a M7 at 480MHz and a at 240MHz. The two cores communicate via a Remote Procedure Call mechanism that seamlessly allows calling functions on the other processor. Both processors share all the in-chip peripherals and can run for sketches on top of the Mbed OS, native Mbed applications, MicroPython/JavaScript via an interpreter, and TensorFlow Lite. With TensorFlow Lite, one core could compute a computer vision algorithm on the fly, while the other could make low-level operations like controlling a motor or acting as a user interface. Graphics Accelerator: The Portenta H7 can connect an external monitor to build a dedicated embedded computer with a user interface. This is possible thanks to the STM32H747 processor's on-chip GPU, the Chrom-ART Accelerator. Besides the GPU, the chip includes a dedicated JPEG encoder and decoder. A New Standard for Pinouts: The Portenta family adds two 80-pin high-density connectors at the bottom of the board, upgrading the board to scalability for various applications. On-Board Connectivity: The onboard wireless module allows simultaneous management of Wi-Fi and BLUETOOTH connectivity. The Wi-Fi interface can be operated as an Access Point, a Station, or a dual-mode simultaneous AP/STA and can handle up to a 65Mbps transfer rate. The Bluetooth interface supports Bluetooth Classic and BLE. Through some of the -styled connectors or the new for industrial 80-pin connector pair, it's also possible to expose a series of different wired interfaces like UART, SPI, Ethernet, or I2C. USB-C Multipurpose Connector: The board's programming connector is a USB-C port that can power the board, act as a USB Hub, connect a DisplayPort monitor, or deliver power to OTG-connected devices. APPLICATIONS: High-end industrial machinery Laboratory equipment Computer vision PLCs Industry-ready user interfaces Robotics controller Mission-critical devices Dedicated stationary computer High-speed booting computation (ms) The Portenta H7 follows the for form factor but is enhanced with the Portenta family 80-pin high-density connector. Read the board's pinout documentation to learn more about its pinout. The Portenta H7 has an additional connector meant as an extension of the I2C bus. It's a small form factor 5-pin connector with a 1.0mm pitch. The mechanical details of the connector can be found in the connector's datasheet. The I2C port, also known as the Eslov self-identification port within for , has SDA, SCL, GND, +5V, and an extra digital pin to alarm the otherwise plain I2C devices. The words on the product due to different batches, but it not affect the use. Color:Black Material:PC Package Contents: 1 * Development board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.