1PC Multifunctional Automatic Incubator Thermostat Temperature Humidity Controller

Description:This multifunctional controller mainly for incubator. With four digital display screens to show the temperature, humidity, numbers of egg-turning and incubation days, this will help you know all the incubation data immediately. Automatic control system, very convenient to operate.Features:Adopting new automatic control system, very convenient to operate.With four digital display screens to show the temperature, humidity, numbers of egg-turning and incubation days, this will help you know all the incubation data immediately.There are 7 signal-output to show over-temperature, temperature control, insufficient temperature, egg-left turning, egg right-turning, humidity control and alarm.It can help you set up the appropriate temperature and humidity that incubation needed according to the data.Provide with one temperature sensor and humidity sensor. Specifications:Condition: 100% Brand NewItem Type: Incubator ControllerVoltage: 220VColor: BlackSize: Approx. 16 x 8.8 x 7.9cm / 6.3 x 3.5 x 3.1inchEnvironmental Temperature: -10℃~60℃Package Weight: 738gMain Technical Index:1.Temperature Measuring Range: 0-40.5 degrees Celsius2.Temperature Measurement Accuracy: ± 0.1 degrees Celsius3.Humidity Measurement Range: 0-99% RH4.Humidity Accuracy: ± 3% RH5.Number of signal-output: 7, (over-temperature, temperature control, insufficient temperature, eggleft-turning, eggright-turning, humidity control, alarm)6.The maximum output load current: temperature control, insufficient temperature ≤ 8.A / AC220V, over-temperature, eggleft-turning, eggright-turning, humidity control, alarm ≤ 1A / AC227.Number of egg-turning: the maximum record is 999 times.8.Cycle of egg-turning: adjustment of 0 - 999 minutes (the factory default is 90 minutes)9.Egg-turning time: adjustment from 0 to 999 seconds (the factory default is 180 seconds)10.Ventilation cycle: from 0 to 999 minutes(The factory default is 120 minutes)11.Ventilation time: from 0 to 999 seconds (the factory default is 30 seconds)Package Include:1 x Incubator Controller1 x Temperature sensor1 x Humidity sensor1 x Operational Manual.Note:1.This product is an incubator accessory, please check whether it matches the incubator before buying, otherwise it is easy to be incompatible and cannot be used.2. Probe and cable colors are random.3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.