Features: Food and non-food applications, for both commercial and home use. Seal a wide range of bags and films with a maximum seal width of 40cm. 8-grades adjustable thermal temperature control. Automatic power-off protection, the machine is plugged into the power supply, the default power-off state, when the operation is used, the sealing machine is powered on and heated to complete the sealing. It is small and portable and can seal various plastics with no warm-up time. Specification: Plug:EU Plug 220V 50Hz Material:Iron+ABS Plastic Pulse Wattage:650W Maximum Seal Width:40cm/15.75in Maximum Seal Thickness:0.6mm/0.02in Maximum Sealing-in Width:3mm/0.12in Heating Time:0.2~2S Package List: 1*Pulse Sealing Machine 2*Heat-resistant Bar 2*Heating Wire 1*Users Manual Users Manual: Simply connect the power cord to the outlet and adjust the heating time based on the seal thickness of the material. Place the plastic bag on top, then press the handle, the LED indicator lights up and the machine will control the heating time itself. When the LED is off, the power is automatically disconnected. After 1-2 seconds, the handle is removed and the seal is completed. The Led indicator lights up only when the machine is sealed, and it does not illuminate if you just connect it to the outlet. If damage occurs during sealing, it is because the heating time is too long, then shorten the heating time by turning the timer knob counterclockwise. If an unsafe seal occurs, it is because the heating time is too short, then extend the heating time by turning the timer knob clockwise If the plastic bag is sticky to the machine, it is because the cooling time is not long enough. Please extend the cooling time after the LED is turned off and keep it for a long time to release the handle. If the heating time is adjusted, do not make any changes during sealing or continuous sealing. You can connect the power cord to the outlet at any time, as it will not consume any power if it is not sealed.