Features: 1.Wireless remote control, allows you to operate the winch within a range of 50ft without the need for cables or switches. 2.Easy to operate, you can start, stop, in or out the winch just by pressing the remote control transmitter. 3.Suitable for most self?recovery winches, such as for Warn, for Ramsey, for Superwinch, for Smittybilt, for Gorilla, for Bulldog, etc. 4.Designed with visual indicator light, which can clearly and intuitively display remote operation, convenient for using. 5.Manufactured according to the original production specifications, in line with strict quality standards, long service life. Specification: Item Type: Winch Remote Control Kit _x000D_ Material: ABS + Metal_x000D_ Battery Type: Alkaline battery (included)_x000D_ Battery Capacity: 150mAh_x000D_ Battery Model: 12V 23A_x000D_ Frequency: 434MHz_x000D_ Voltage: 12V_x000D_ Remote Control Size: Approx. 43 x 100mm/1.7 x 3.9in_x000D_ Receiver Size: Approx. 43 x 70mm/1.7 x 2.8in_x000D_ Features:_x000D_ The remote range is up to 50 feet._x000D_ The transmitter is equipped with a long life._x000D_ Battery and power saving circuit._x000D_ Transmitter and receiver._x000D_ The visual indicator shows remote operation._x000D_ An additional transmitter that can be used to operate the receiver._x000D_ Installed in a few minutes._x000D_ Transmitter replacement battery is available at any time._x000D_ Suitable for Truck, ATV, SUV_x000D_ _x000D_ The wireless remote control is only designed for the front self-recovery winch._x000D_ The remote control is not designed and used in industrial applications (commercial vehicle transporter/transporter, wrecker, crane, etc.) or any other remote control application for winches or cranes._x000D_ _x000D_ We recommend that you operate the winch as follows:_x000D_ 1. Loosen the winch clutch._x000D_ 2. Pull out the winch wire rope about 1.5 meters._x000D_ 3. Re-engage the clutch of the winch._x000D_ 4. Insert the plug of the remote control receiver into the female connector of the electromagnetic control box of the winch. If your wireless remote control is -03 type, you should correctly connect the black ground wire to the negative pole of the battery._x000D_ 5. Put your receiver somewhere._x000D_ 6. Keep the receiver antenna straight._x000D_ 7. Pull out the transmitter antenna and move the transmitter cover down to expose the control buttons._x000D_ 8. Press the button, you can operate the winch to start, stop, in and out._x000D_ (It is strongly recommended to find a professional to install)