Description of the object Attention: Using Time: approximately 1 minute (will automatically power off in order to protect the machine, can be used again after cooling) With CE/220V UK Plug/English Manual/LED Light Please make sure that the coil has been fully inserted into the interface of the machine before turning on the machine. If the coil is not installed properly, the machine may overheat and cause a short circuit. Feature: 1.An induction heater is a key piece of equipment used in all forms of induction heating. 2.The inductor is a hand-held one with slip-resist ergonomic housing. Faster and safer than traditional torch. Collateral damage normally associated with torches can also be eliminated. 4.A bright LED light exists to light up your work load. Specification: Voltage: 220V AC 60Hz Wattage: 1100W Plug:UK Operating Temperature: -40C to 60C Relative Humidity: <95% RH Atmospheric Pressure: 86KPa~10KPa Illumination: LED Light Model Number:kIA-1KW Certificate:CE(EMC,LVD),UL,CCC,Available for COC,POVC Induction Coil:Diameter*Quantity:F30mm*2(PCS),F40mm*2(PCS),F50mm*2(PCS),Spare Wire*2(PCS) Heating Bolt Diameter:F5-40mm Heater Dimension:36CM*6.8Cm*6.8CM Applications: Preheat become attached or rested fasteners and parts that need to be separate 2. Straight small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on car body parts when you restore or straightening. 3. Burning silent blocks, pressed on beams running gear or other machinery and equipment. 4. Heat treatment of metal parts, hardening, tempering, normalizing. 5. Pressing bearing on a hot landing, as well as flowability. 6. Snyatie small laminated glass sealants for metal. 7. Removing glue on painted metal spoilers, moldings, stickers. 8.The heating of the surface of the hood or other surfaces to be coated vinyl. 9. Removing rest from metal and car body by high-speed heating parts, and flaking rest. 10. Removing paint coating to a metal surface or body cars. Safety Rules: 1.Read manual carefully before using. 2.Keep your work area clean. 3.Do not overreach, keep clean footing and balance at all times, clean footing and balance enables better control. 4.Do not use in wet surroundings or immerse it in water to electric shock hazard and machine damage. The advantage of using this device is it is totally flameless,comparing with traditional way lf heating by fire,it is much safer and of higher work efficiency,without the worry of harming the adjacent area,Light weight do not do water cooling,and very easy to use This device adopts Electro-Magnetic induction theory,can fast heat small metal parts on auto or machines, Mainly used for heating Rusted/Frozen/Corrosive Bolt,Nut,Fasteners,Suspension Nut,Gears,Pulley,and Bearings etc,Meanhile,it also can help removing stickers on cars. Heating Abilities: In around 30 seconds,it can heat a 20mm dimeter bolt to a temperature above 300, maximum temperature can reach around 750 The package includes 1 x Magnetic Induction Heater 6 x Coils 2 x spare lines(can change shape) 1 x Manual 1 x Tool Box