Touch Panel for iPad Air (2020) Air 4 10.9 inch 4th Generation A2324 A2072 A2316 Replacement touch panel compatible with iPad Air (2020) Model Air 4, 10.9-inch, 4th Generation, A2324, A2072, A2316 Replace your damaged or non-functional screen with a new replacement part Restores device appearance and functionality Precise fit and full compatibility Each unit is tested and inspected to ensure good working condition prior to shipment Professional installation is strongly recommended Before Installation: Test the screen before installation. Do not remove any protective films or labels during testing. Be aware of static electricity. Always ground yourself using an ESD (electrostatic discharge) strap before beginning any repair to prevent damage to internal components. Wear eye protection and handle glass components carefully to avoid injury from sharp edges. Screen replacements are delicate. Testing before installation is highly recommended. Perform a simulation test by connecting the touch screen and cable to the device while disassembled, power on the device, and verify full functionality. If the test is successful, proceed with full installation. If the screen does not display properly, contact support immediately. Do not force installation if issues are present. No responsibility will be accepted after installation. Avoid excessive bending of the LCD cable. Do not bend the cable beyond 90 degrees, as this may result in display failure or black screen issues.