Feature: 1. EASY INSTALLATION: The commonly used stainless steel wire clips on the market are difficult to install. The plastic wire clips are convenient to install and will not destroy the surface protective layer of the photovoltaic module. The barbed wire clips of stainless steel will scratch the protective layer of frame of the photovoltaic module in the installation process, affecting the service life of the module 2. DURABLE FOR OUTDOOR: Using excellent PA66 plastic material, aging resistant, high and low temperature resistant, can be used outdoors for a long time. At the same time, can effectively avoid the safety hazards such as arc pulling, melting and fire caused by repeated erosion of the joint by rain 3. AVOID LOSS: Compared with stainless steel wire clamp, plastic wire flash can avoid circulation problem caused by stainless steel wire flash on DC side cable, and avoid power loss caused by circulation 4. STRONG COMPATIBILITY: The cable clip can hold the cable specifications from dia6.0 to dia6.50mm, can fix single or multiple cables(standard cable configuration 2x4.0mm²,4x4.0mm²); Suitable for the thickness of 1.0mm-3.2mm range of solar bezel or bracket clamping 5. EASY TO USE: You can install the wire plate clamp in a few seconds by clamping in the target position by hand, without tools or instructions, and does not take up too much time and effort; To manage the wires, simply clip them onto the wire frame, 2 wires per clip, and you can also easily remove them without leaving marks on the panel or wires 6. MULTI PURPOSE: Wire harness clamps have a variety of uses, such as applications in household PV modules, kayaks, fishing boats, trailers, workbenches, offices, etc., to help you organize wires and cables, thus keeping tidy and saving space Specification: Item Type: Solar Panel Cable Clip Material: PA66 plastic Applicable Component Thickness: Approx. 1.0 ~ 3.2mm / 0.04 ~ 0.13in Applicable Line Quantity: 2 Lines Applicable Wire Diameter: Approx. 6 ~ 6.5mm / 0.24 ~ 0.26in Application: Photovoltaic cable, photovoltaic wire, etc.. Package List: 100 x Solar Panel Cable Clip Note: 1. The connector must be suspended by photovoltaic hooks.2. During installation, install a connector hook at both ends of each connector. The connector is in a suspended state and should not directly contact with the color steel plate of the building.