The PS5712P splitter is a well-crafted PoE splitting cable that complies with the IEEE 802.3af standard and can provide a DC 12V power supply for network terminals below 12.95W, with a transmission bandwidth of 10/100M. The PS5712P splitter separates the power and data signals transmitted through cable and is used in conjunction with power supply equipment that conforms to the IEEE 802.3af standard (such as PoE power supply switches, PoE centralized power supplies, PoE power supply transceivers, etc.), and can be used for networks that do not support PoE. The device provides both data and power. The PS5712P splitter can output 12V voltage and can be used with power supply equipment to flexibly expand the home network and office network without being restricted by the power line layout. 100M POE separation line (PS5712P) 1 x 10/100Mbps RJ45 port Support IEEE 802.3af Power over Ethernet standard Support 10/100M data transmission 12V, suitable for small network equipment 1.5KV isolation protection, effectively protects electrical equipment High-quality design effectively guarantees the stable and reliable operation of the equipment Product technical indicators: PoE features: support IEEE802.3af power supply standard (15.4W) Power supply mode: support 1/2 3/6 4/5 7/8(-) power supply mode PoE input voltage: 44-57V DC seat voltage output: 12V DC seat current output: 1.08A (MAX) Electrical interface parameters: 1 x Input RJ45 interface 1 x Output RJ45 connector 1 x DC output plug Cable Type: Category 5 Unshielded Twisted Pair (UTP) or higher Protocol standard: IEEE 802.3 af Power over Ethernet Rate: 10/100M LED indicator: PoE input power indicator Ambient temperature: Working temperature: 0~55°C; working humidity: 90%, non-condensing Storage temperature: -20~70°C; storage humidity: 95%, non-condensing Color: Black Material: Plastic Package Contents: 1 x PoE Splitter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3cm.