Product Description:The PS5712P splitter is a well-crafted PoE splitting cable that complies with the IEEE 802.3af standard and can DC 12V power supply for network terminals 12.95W, with a transmission bandwidth of 10/100M.The PS5712P splitter separates the power and data signals transmitted through cable, and is used in conjunction with power supply equipment that conforms to the IEEE 802.3af standard (such as PoE power supply switches, PoE centralized power supplies, PoE power supply transceivers, etc.), and can be used for networks that do not support PoE.The device provides both data and power. The PS5712P splitter can output 12V voltage and can be used with power supply equipment to flexibly expand the home network and office network without being restricted by the power line layout.100M POE separation line (PS5712P)1 10/100Mbps RJ45 portSupport IEEE 802.3af Power over Ethernet standardSupport 10/100M data transmission12V , suitable for small network equipment1.5KV isolation protection, effectively protect electrical equipmentHigh-quality design effectively guarantees the stable and operation of the equipmentProduct technical indicators:PoE features: support IEEE802.3af power supply standard (15.4W)Power supply mode: support 1/2(+), 3/6(-); 4/5(+), 7/8(-) power supply modePoE input voltage: 44-57VDC voltage output: 12VDC current output: 1.08A (MAX)Electrical interface parameters:1 x Input RJ45 interface1 x output RJ45 crystal head1 x DC output plugCable Type: Category 5 Unshielded Pair (UTP) or higherProtocol standard: IEEE 802.3 Power over EthernetRate: 10/100MLED indicator: PoE input power indicator temperatureWorking temperature: 0~55; working humidity: 90%, non-condensing;Storage temperature: -20~70; storage humidity: 95%, non-condensing;Colour: Blackmaterial: plasticPackage Contents:1 x PoE Splitter the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.