1: The appearance is simple and efficient, beautiful and generous 2: Frequency bandwidth, high sensitivity, 100KHz-1000MHz (with antenna is 400-470Mz, please use different frequency antennas to test signals with different frequencies for better effect and sensitivity) 3: The pointer amplitude can be adjusted (to protect the meter) 4: Built-in automatic damping function, which is the buffer function, prevents the needle from swinging too fast and causing damage. 5: Small size, easy to carry, size: 90x115x70mm (excluding the raised antenna part) 6: Test sensitivity: 0.1w transmitter distance 0.1-1 meters 2W/5W transmitter, 1-3 meters range. The 10W transmitter is in the range of 2-5 meters. 50W is about 3-10 meters. With the HP8921A radio comprehensive tester, the sensitivity is -20dbm, and the -2dbm can be full. (The video rate is different and the sensitivity will be different) Instructions for use: Before use, please rotate the "amplitude adjustment" to the leftmost end. The length of the antenna to be pulled depends on the frequency of the test. It is better to have 1/4 wave as much as possible. The handheld walkie-talkie is about one meter from strength meter. 't be too close In order to avoid the signal is too strong to burn strength meter Then press the walkie-talkie PTT button to make the walkie-talkie enter the launch state. At this time, the pointer of strength meter should have a signal indication. The stronger the signal, the greater the indication Colour:As Shown Material:plastic Package Contents: 1 x Indicator Meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.