["Features:\n\nTurn your machine into a slotting machine in seconds, professional refitting for head, convenient, fast and practical\n\nPrecautions:\n\n1. The ga-p of the cutting piece is the thickness of the gasket, which can be modified and used according to your own needs\n\n2. When installing the saw blade, you need to select the inner hole corresponding to the conversion nut\n\n3. When converting, please control the number of saw blades installed within the controllable range\n\n(It is recommended to install 3 pieces for 100 type and 4 pieces for 125 type to ensure safe use)\n\n4. The conversion nut is non-standard tip. After installation, it needs to be idling to test and operate after stable to ensure construction safety. Protective equipment must be worn\n\n5.Sturdy installation according to the rotation direction indicated by the saw blade, and no reverse operation\n\n6. When dry cutting, do not connect for a long for time to cut, so as not to affect the use effect and life of the saw blade\n\n7. When using, it is best to lengthen when wet cutting, do not curve cutting or single-side grinding, it is easy to chip\n\n\nSpecifications:\n\n*Product name: Angle grinder variable slotting machine conversion for head\n\n*material: metal\n\n*Color as shown\n\n*Thread: M10, M14\n\n*Size: as shown\n\n*Summary: 100 type 125 type angle grinder modified slotting machine hydroelectric slotting, hand grinder to slotting machine modified for head accessories\n\nPackage Contents:\n\n1 * Conversion for head for angle grinder and slotting machine\n\nNote:1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n\n2. Please allow slight manual measurement deviation for the data."]