Feature:1. Configuration of highquality aviation cable connectors, with highquality anticorrosion, antierosion function, can be used for a long time.2. Light in weight, which can reduce friction, improve sensitivity, ensure the accuracy of measurement.3. Three Cup appearance design, 360 degree wind speed measurement, low power consumption, stable performance, high efficiency.4. Polycarbonate material, with acid and alkali resistance, oxidation resistance and other characteristics, greatly prolonged the service life.5. The surface is treated by electroplating and spraying, which is anticorrosion and antiinvasion, and has no rust phenomenon for a long time.6. Waterproof fourcore cable, black shielded cable, waterproof, oilproof, antiinterference ability, stable signal transmission.7. With moistureproof and anticorrosion aluminium alloy shell, high precision measurement and wide range of measurement, it is a special meteorological measuring tool.8. It can be widely used in wind speed measurement of power plants, wind speed and direction measurement of meteorological monitoring, wind speed and direction measurement of navigation and aviation, and intelligent wind speed and direction measurement of agriculture.Specification:Condition: 100% Brand NewItem Type: Wind SensorMaterial: Aluminum Alloy, PolycarbonateOutput Voltage: 0-5VWind Speed Measurement Range: 0-30m/SAccuracy of Wind Speed Measurement: +1m/SResponse Time: <5sBaud Rate: 2400/4800/9600Power Consumption: <1WOperating Temperature: -30 - 80Working Temperature Environment: 0-100% RH (15-95% RH)Weight: Approx. 518g / 18.3ozHeight: Approx. 12.4cm / 4.9inWiring Instructions:Brown: Power Supply Positive (12-24V)Black: Power Supply Negative (12-24V)Yellow: V OUT+Blue: V OUT-Application: Wind speed measurement of power plant, wind speed and direction measurement of meteorological monitoring, wind speed and direction measurement of navigation and aviation, wind speed and direction measurement of agricultural intelligent wind speed and direction measurementInstallation Method:1. Ensure that the mounting bracket is parallel to the ground;2. Installation with flange and fixing with bolt on bracket;3. Connect the air socket connector with the air socket of the sensor through the reserved air route hole.Package List:1 x Wind Sensor1 x Cable1 x Bag of ScrewsNote:1.Please allow 01 inch error due to manual measurement. Thanks for your understanding.2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.