Color:greenMaterial:CCLHousing and wire connectors are waterproof design, good sealing, suitable for harsh environmentsLook beautiful, durable, anti-jamming performanceUltra- high-precision op amp circuit, high accuracy, good stabilityThe power supply has reverse polarity protection, surge protection, overcurrent protectionSuitable for weighing, pull pressure, torque, and other strain sensor.Working voltage: 12VDC- 24VDCSensor Sensitivity: 2.0MV / VExcitation output: Output excitation voltage 5V (E +).Output signal: 0-10VOperating temperature range: -20 - 80Operating Humidity: 10% RH-90% RH (non-condensing)Accuracy: better than 0.2% F.SPrecision is better than 0.05% F.SDIP switch No. 1 is appropriated for OFF, VO output 0-5V, when No. 1 to the ON, VO output 0-10V, when DIP switch No. 1 and No. 2 are appropriated for OFF.1. Zero adjustment1: voltage regulation, first the system is unloaded, the regulated voltage zero potentiometer (Vzero) to adjust the zero point. Measured with a multimeter voltage output terminal VO, let indication as close to zero indication.2: The current adjustment, first the system is unloaded, the current zero adjustment potentiometer (Izero), with a multimeter block measuring the current output of the current IO, try to let it close to 4mA.The re-examinationThe system is unloaded, the measured zero output; load a certain weight values, measured output voltage is expected magnification. If you do not match, adjust again.Package Contents:1 x 0-10V Load Cell Sensor TransmitterNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.