1 LCD can display input/output voltage, output current/output power/output capacity/output time; 2. CNC adjustment, accurate and fast, can boost and lower voltage, output voltage can be adjusted at from 0.5-30v, limit current 0-4a can be adjusted at ; 3. Anti-reverse connection protection of input end, which not burn out; 4. Anti-reverse irrigation at the output end, no additional anti-reverse irrigation diode is needed to charge the battery; 5. The module can be set to open/close by default;<br><br>Multiple software protection mechanisms are available, and the protection threshold is adjustable.When the working parameters of the module exceed the protection threshold, the output be automatically closed. Output ripple is small and PI filter is available; Thicken radiator fins. Input voltage: 5.0-30v Output voltage: 0.5-30v Output current: can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation Output power: natural heat dissipation 35W, strengthen heat dissipation 50W Voltage display resolution: 0.01V Current display resolution: 0.001A Conversion efficiency: about 88% Soft start: yes (with high power and load module may fail when starting) Protection mechanism: Input anti-reverse connection; Output anti-reverse irrigation; Input undervoltage protection (4.8-30v adjustable, default 4.8v) Output overvoltage protection (0.5-31v adjustable, default 31V) Output overcurrent protection 0-4.1a (adjustable, default 4.1a) Overpower protection (0-50w adjustable, default 50W) Overtemperature protection (80-110 adjustable, default 110) Timeout protection (0-100h adjustable, off by default) Super capacity protection (0-60ah adjustable, off by default) Operating frequency: 180KHZ Color: As Shown Material: plastic<br><br>Package Contents: 1 x -5KX Programmable Buckling Power Module<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.