Printhead for HP 940 C4900A C4901A for 8000 8500 Series (CMYK)

₹1,899.00
FREE Shipping

Printhead for HP 940 C4900A C4901A for 8000 8500 Series (CMYK)

  • Brand: Unbranded

Printhead for HP 940 C4900A C4901A for 8000 8500 Series (CMYK)

  • Brand: Unbranded
RRP: ₹2,449.00
Price: ₹1,899.00
You save: ₹550.00 (22%)
Sold by:
₹1,899.00
FREE Shipping

In stock

We accept the following payment methods

Description

Features:1. This is a professional print head that is compatible with a wide range of models.2. This print head is smooth and stable, and the color is natural. It is a worthy print replacement that you deserve.3. Ink with high degree of reduction and sufficient ink to save your cost.4. The nozzle is polished, no paper jam, and the printing process is smooth.5. All use Bayer raw materials from Germany, the quality is guaranteed.Specification:Color: Black / Yellow, Magenta / Cyan, CMYK (Optional)Applicable models:for HP Officejet Pro8000/8500/8500A PrintheadSize: Approx. 94 x 57 x 20 mm / 3.7 x 2.2 x 0.8inWeight: approx. 80-160gNote: Please remove the polishing cardboard nozzle and remove the orange rubber plug before installation.Instructions:After receiving the product, remove the nozzle from the package. Before disassembling the protective device, shake the nozzle continuously to the left and right according to the figure to achieve the best use effect to achieve the best use effect. Then remove the protective device (orange with the outwardly turned handle). In order to avoid the internal inverted buckle of the protective device from damaging the circuit of the print head and causing the print head to fail to operate, pay attention to push the handle out as hard as possible. Then pull the reminder label together with the sealing blue tape to tear off. Finally, pull out the protective plug of the ink supply needle (the orange belt, please shake the nozzle arrow left and right before opening the protective clip).Installation steps:First take out the two old print heads, close the cover and turn on the printer power normally. After the print head indicator on the machine flashes, open the cover. At this time, the print head carriage (carriage) in the machine will move to the left of the machine. After it stops, install the two nozzles one by one and close the machine cover. The machine will perform calibration and print a test page. Some models will prompt "calibration failed" or "calibration failed" (this is a technical obstacle set by the original company for its products to monopolize the market, but the chip has a memory function after all nozzles are regenerated, making the calibration fail , Has nothing to do with the quality of the regeneration nozzle). In such a situation, click the "OK" or "Confirm" button on the machine panel according to the prompts, and the printing will proceed normally.Reminder: Some models will calibrate and print a test page every time they are turned on. This is normal and has nothing to do with the quality of the print head. Just click the "0k" or "confirm" button on the machinepanel. It will not be calibrated every time you print without turning off the machine. Some models of the machinewill perform a longer calibration before and after the first printing, which lasts about 20 minutes. At this time, please do not turn off the machineor press any control keys to avoid affecting the calibration.Precautions:(1) Avoid physical contact with the nozzle holes and circuits of the nozzle to avoid electrostatic breakdown of electroniccomponents and damage.(2) Check whether there is enough inkin the inkcartridgeof the printerat any time, and add it in time to avoid the lack of inkto burn the nozzle.(3) The machineshould not be left unused for too longto avoid clogging of the nozzles without a longtime.(4) The nozzles and inkcartridges should not be removed frequently or not installed for a longtime, so as to prevent the inksupply pipefrom entering the airand causing the inksupply to be discontinuous, and the nozzle lack of inkwill affect the printing effect or burn the nozzle.(5) If it prompts "KY print head failure" or "C business head failure", try to take out the two print heads, gently wipe the circuit contacts of the failed print head with an eraser, and then install and use.(6) When the printing effect is not satisfactory, the machinewith a control panel can execute the item "cleaning nozzle" in the "setting" option on the panel. When a machinewithout a control panel is printing, a printericonwill appear in the lower right corner of the computer screen. After clicking on it, click "Printer" and then "Properties" in the dialog boxof the county float, and then find the "Printercleaning" item after entering. Different models have different attributes, and some models may not have this function. The nozzle can be taken out and soak the nozzle hole with clean50-60 degree drinking water for 3-5 minutes. Pay attention to the nozzle hole soaking, and the water levelshould not be higher than the circuit contact. Then lightly print the nozzle hole with a cleanpaper towel, and print several times And cleanthe water stains before installing the machineto use.It is also recommended to set the print quality to "bestquality" to also improve the printing effect..
  • Fruugo ID: 420388429-885793793
  • EAN: 7847689719082

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: Warning: Please read the product instructions carefully before use to ensure correct use.
Serial Number: 7847689719082

Delivery & Returns

Dispatched within 2 days

  • STANDARD: FREE - Delivery between Thu 23 October 2025–Thu 30 October 2025 - FREE

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Shenzhen Gujun Technology Co., Ltd.
  • Shenzhen Gujun Technology Co., Ltd.
  • 1303, 13/F, Tower B, TCL Building, No. 6 Gaoxin Nandao Road, Yuehai Street
  • Nanshan District
  • Shenzhen
  • Guangdong
  • CN
  • 518067
  • idyaiy16984@163.com
  • 13038870349
  • https://hengruigongju.1688.com/page/index.html?spm=0.0.wp_pc_common_header_companyName_undefined.0

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795
  • https://www.ozon.ru/seller/topstore-600244/products/?miniapp=seller_600244&__rr=1&abt_att=1