This MSP -FET430UIF is a flash emulation tool to started with application development quickly on the MSP430 MCU. It includes USB debugging interface used to & debug the MSP430 in-system via the JTAG interface or the pin saving Bi-Wire (2-wire JTAG) protocol. The flash memory can be easily erased and reprogrammed in seconds with only a few keystrokes. The MSP430 flash is ultra-low power, so no external power supply is required.This debugging tool interfaces the MSP430 to the included integrated software environment and includes code to immediately. The MSP -FET430UIF development tools supports development with all MSP430 flash devices.The USB Debugging Interface is compatible with IAR Version 3.21 or higher.Via USB debugging interface (MSP-FET430UIF), a flash-based MSP430 MCU can be connected to a PC for real-time, in-system programming and debugging: it can support Windows XP, Windows Vista, Windows 7 (32 & 64-bit)Technical Specifications:Software configurable supply voltage: between 1.8 and 3.6 volts at 100mASupports JTAG Security Fuse blow to codeSupports all MSP430 boards with JTAG headerSupports both JTAG and -Bi-Wire (2-wire JTAG) debug protocolsMaterial: plasticcolour: As shownPackage Contents:1 x MSP 430 debugger1 x USB cable1 x 14-pin Flat cable1 x CDOnly the above package content, other are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.