Description Description: Functional Features: Upgrade to version 2.1 and provide three functions for user to choose Standard 0.5 meters waterproof type temperature sensor,in addition there are different types of temperature sensors and different lengths can be selected Measurement resolution upgrade to 0.1,measurement range from -40 to 125 The users can set independently and add automatic power saving function All settings can be automatically saved and the content is not lost when power is off Module Function: Temperature measurement:If you select this function,the module not action,but the digital tube can display the current temperature Heating control:When the temperature is lower than the preset temperature lower at T1 and T2,relay will suck;when the temperature is higher than the preset temperature higher at T1 and T2,relay will be off Refrigeration control:When the temperature is higher than the preset temperature higher at T1 and T2,relay will suck;when the temperature is lower than the preset temperature lower at T1 and T2,relay will be off Kindly reminder: Controller will judge preset temperature T1 and T2,which one is the start of the temperature or the end of the temperature automatically according to the features.When user set the controller,no need to consider the question which one is first or last and high or low CT:When CT indicator light is on,the content of the digital tube display is the current measured temperature.This parameters canfor t be set up MD:When MD indicator light is on,content of the digital tube display is the current program function,there are three kinds of preset functions for user to choose from 01 to 03 T1:When T1 indicator light is on,the content of the digital tube display is the preset temperature T1,can be -40 degrees to 125 degrees T2:When T2 indicator light is on,the content of the digital tube display is the preset temperature T1,can be -40 degrees to 125 degrees Electrical parameters: Operating voltage: 5V12V and 24V(+/-10%) Working current: 5v: less than 90mA (when the relay is not operating less than 15mA,turn off the display less than 3mA) 12V: less than 50mA(when the relay is not operating less than 15mA,turn off the display less than 3mA) 24V: less than 50mA(when the relay is not operating less than 15mA,turn off the display less than 3mA) Working temperature: recommend -20 to 60(limit -30 to 70) Measuring temperature: recommend -30 to 120(limit -40 to 125) Lode Capacity: for DC 0 to 30V(10A),AC 0 to 125V(10A) DC+: for DC power positive DC-: for DC power negative NTC: The jack of temperature sensor Module Output: There are three interfaces,all interfaces have terminal NO:Normally open interface,the rely becomes vacant before,after pull-in short with the COM COM:Common interface NC:Normally closed interface,short with COM become vacant after pull-in Dimensions:66mm*40mm*20mm/2.59*1.57*0.78 Quantity: 1 pc Package includes: 1 x Temperature Control Module of HRM100 1 x 50cm Water Dripping Type of Temperature Control module