Product parameters:1. Charging power supply: 5V/1A2. Built-in lithium battery: 600mah3. Input charging voltage: DC 5V4. Bluetooth version: 4.05. Transmission distance: 10 meters6. Sleep current: less than 50 microamps7. Input current: 25mA-150mA8. Applicable models: for Sony PS3 / Microsoft XBOX One / PC9. Material: ABS10. Gross weight: 280gInstructions:1. Start the Xbox one host, plug the USB connector on the receiver end into the host, then the LED light of the receiver will flash, short press the handle2. Turn on the HOME button and the LED1-LED4 lights flash to enter the search pairing. After the connection is successful, the LED1-LED4 lights of the handle are always on, and the receiver lights are always on to use3. Start the PS3 host, plug the USB connector of the receiver into the host, then the LED light of the receiver will flash, short press the handle HOME button4. Turn on the LED1-LED4 lights and enter the search pairing. After the connection is successful, the indicator light corresponding to the handle is always on, and the receiver light is always on and you can use it.5. Start the PC computer, plug the USB connector on the receiver end into the host computer, then the LED light of the receiver will flash, and short press the HOME button on the handle6. Turn on the LED1-LED4 lights and enter the search pairing. After the connection is successful, the indicator light corresponding to the handle is always on, and the receiver light is always on to use. Press and hold the HOME button for 5 seconds to switch between X-input/D-input mode. X-input mode LED1 light is always on, D-input mode LED1-LED4 lights are always onPacking list:-1 x wireless handle-1 x packing box-1 x receiver-1 x charging cable-1 x instruction manual