Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Fit for 3D Printer Models: The double sided PET and PEO build plate is 355X346mm and designed to be compatible with forbambu lab h2d 3d printer.Please confirm your 3D printer model and printing platform size before ordering. Superior Adhesion: You can print directly on each side of a double-sided PET and PEO sheet without the need to use any glue or other tools to help the model stick to the build plate sheet. Excellent adhesion is achieved when the temperature of the heated bed is about 60°C. Easy To Remove the Model: Prints on the double-sided h2d build plate sheet come off easily when the heated bed temperature drops to room temperature, and if the print is still stuck to the plate, gently bending the build plate removes it. PET and PEO material offers greater stability, while spring steel sheets offer excellent flexibility and high flatness. Easy To Install: Place the double-sided PET and PEO build plate on the heat bed of the 3D printer and use it directly. The smooth Carbon Fiber PET and Diamond PEO heated bed is made by high temperature process. Magnetic base is not included. Double Sided Build Plate Design: The 355x346mm double sided platform offers wider material compatibility and twice the service life compared to single sided platforms. It is reusable, so if one side is accidentally , the other side can continue to be used. PET bed mat and PEO bed mat have smooth surface, can be used on both sides. Color: As Shown Material: steel Package Contents: 1 x for Bambu Lab H2D Build Plate Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.