Dual Channel Relay Module with LCD Display for Temperature and Humidity Control, 10A Thermostat Sensor Rail System

₹3,699.00
+ ₹1,635.49 शिपिंग

Dual Channel Relay Module with LCD Display for Temperature and Humidity Control, 10A Thermostat Sensor Rail System

  • ब्रांड: Unbranded

Dual Channel Relay Module with LCD Display for Temperature and Humidity Control, 10A Thermostat Sensor Rail System

  • ब्रांड: Unbranded
RRP: ₹5,990.00
मूल्य: ₹3,699.00
आपकी बचत: ₹2,291.00 (38%)
द्वारा बेचा गया:
₹3,699.00
+ ₹1,635.49 शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

Dual Channel Relay Module with LCD Display for Temperature and Humidity Control, 10A Thermostat Sensor Rail System

The product features temperature and humidity control functions. Temperature functions: 1. Automatic mode detection: The system automatically identifies the operating mode based on start and stop temperatures. If start temperature is higher than stop temperature, it enters cooling mode (C). If start temperature is lower than stop temperature, it enters heating mode (H). 2. Cooling mode: When the detected temperature rises above the start temperature, the relay activates, the red indicator light turns on, and the cooling equipment starts. When the temperature drops to the stop temperature, the relay turns off, the red light turns off, and the cooling equipment stops. 3. Heating mode: When the detected temperature falls below the start temperature, the relay activates, the red indicator light turns on, and the heating equipment starts. When the temperature reaches the stop temperature, the relay turns off, the red light turns off, and the heating equipment stops. 4. Temperature correction (OFE: -10.0 to 10.0): To correct measurement deviations after prolonged use, the actual temperature is calculated as: measured temperature + correction value. How to set start/stop temperature: - From the running interface, press and hold the "TM+" button for more than 3 seconds to enter the start temperature setting. Adjust the value using the TM+ and TM- buttons. After setting, wait 6 seconds for the system to save and exit automatically. - From the running interface, press and hold the "TM-" button for more than 3 seconds to enter the stop temperature setting. Adjust the value using the TM+ and TM- buttons. After setting, wait 6 seconds for the system to save and exit automatically. Humidity functions: 1. Automatic mode detection: The system automatically identifies the operating mode based on start and stop humidity levels. If start humidity is higher than stop humidity, it enters dehumidification mode (d). If start humidity is lower than stop humidity, it enters humidification mode (E). 2. Dehumidification mode: When the detected humidity exceeds the start humidity, the relay activates, the green indicator light turns on, and the dehumidification equipment starts. When the humidity drops to the stop humidity, the relay turns off, the green light turns off, and the equipment stops. 3. Humidification mode: When the detected humidity falls below the start humidity, the relay activates, the green indicator light turns on, and the humidification equipment starts. When the humidity reaches the stop humidity, the relay turns off, the green light turns off, and the equipment stops. 4. Humidity correction (RH: -10.0 to 10.0): To correct measurement deviations after prolonged use, the actual humidity is calculated as: measured humidity + correction value. How to set start/stop humidity: - From the running interface, press and hold the "RH+" button for more than 3 seconds to enter the start humidity setting. Adjust the value using the RH+ and RH- buttons. After setting, wait 6 seconds for the system to save and exit automatically. - From the running interface, press and hold the "RH-" button for more than 3 seconds to enter the stop humidity setting. Adjust the value using the RH+ and RH- buttons. After setting, wait 6 seconds for the system to save and exit automatically.
  • Fruugo ID: 399229885-850166315
  • EAN: 1243206498571

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Check the product before use to ensure that the product is not damaged.
निर्माता भाग संख्या: RK43531
मॉडल नंबर: RU43531
क्रम संख्या: LK43531
बैच संख्या: GL43531

डिलीवरी और वापसी

24 घंटों के भीतर भेजा जाएगा

  • STANDARD: ₹1,635.49 - के बीच वितरण बुध 17 दिसंबर 2025–सोम 29 दिसंबर 2025

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Chen Ge
  • Shanghai Ganlan Network Technology Co., Ltd.
  • No. 139, Rongmei Road, Building 1,Songjiang District,Shanghai City
  • Shanghai
  • CN
  • 201601
  • qizao88361@163.com
  • 13413952153

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149