Specification: Made of high-quality materials for durability With this conversion kit installed, your gasoline generator will be able to use LPG propane or CNG methane gas without any impact on the generator's original gasoline system (you can still use gasoline). This kit is only suitable for low pressure gases such as domestic propane. Conversion kits include a zero pressure regulator and a gas carburetor. The zero pressure regulator reduces the propane gas or natural gas from high to low and stabilizes the gas pressure before entering the gas carburetor and then the engine; when the generator stops working, the zero pressure regulator also shuts off the gas supply, So it's safe, you don't have to worry about the gas still going into the engine after the generator goes out. After the conversion, the generator power remains unchanged. When using propane or methane gas, power depends on generator quality and gas quality. TriFuels: Gasoline, Low Pressure Propane LPG Gas/Methane CNG Gas (use only one at a time) Weight: Approx. 600 grams Accessories: It is mainly designed to replace a For Honda 168F generator, but please check our gas carburetor sizes to see if it can replace your generator carburetor, if so, it will fit; if not, put Not suitable. EASY INSTALLATION: Just replace your generator carburetor with our gas carburetor (please double check if your generator carburetor is replaceable before buying!) NOTE: It is your responsibility to ensure that the use of this conversion kit complies with your local laws. NOTE: When starting with propane or methane gas, make sure there is no gasoline in the carburetor or the generator will not work properly. Instructions for use: The new system does not contain oil, please add 0.9L before use. (The instructions in Chinese translation below may be confusing, don't worry, just use propane (or methane) gas as an alternative fuel, when you use propane (or methane) gas, it's using gasoline, just be careful, start using When using propane (methane) gas, make sure there is no gasoline in the carburetor; when using gasoline, make sure there is no propane (methane) gas in the carburetor, simple!) How to start the generator: - Start with propane gas: 1. Turn off the gasoline switch (make sure there is no gasoline in the carburetor) 2. Turn on the propane gas switch. 3. Close the throttle valve switch, pull it 3 to 4 times, open the throttle valve to the middle and then fully open it; when the engine is hot, it will open and start directly. 4. Turn on the power switch 5. Pull the start rope 4-5 times (throttle valve closed or open to the middle) / (key) generator start 6. After starting, open the throttle switch on the carburetor mixing device 7. The generator starts normally Generator shutdown steps: Turn off the propane gas tank switch first, then turn off the generator switch. - Start with gasoline: 1. Turn off the propane gas 2. Turn on gasoline 3. Turn off the choke switch on the gasoline carburetor 4. Turn on the power switch 5. Pull the starting rope several times, the generator starts 6. After starting, open the throttle switch on the carburetor mixing device 7. The generator starts normally Notice: 1. Do not use indoors, if necessary, please ensure good ventilation 2. Do not use when the intake pressure is too high or too low, the working pressure should be between 2.8~4.8 3. It cannot be determined whether there is air leakage at the outlet connection of the gas tank or the gas connection of the pipeline 4. Do not turn the gas storage tank upside down to prevent gas impurities from entering the gas system Package includes: 1pc of Generator Conversion Kit