Suitable for bedside lamps, table lamps, night lights, and decorative lighting. Features a button switch to turn power on and off. Adjustable dimming range controlled by a knob on the bottom. Slide foot-operated lamp cord LED dimmer. Cord line (slide) full range dimmer switch. Input Voltage: 220-240V 50/60Hz Output Voltage: 220-240V 50/60Hz Dimming Range: LED 3-24W; HV 3-60W Installation Methods and Steps: 1. Install the circuit board module into the back cover, ensuring correct orientation. 2. Wiring: Connect the power and load wires to the corresponding terminals and secure with a screwdriver. Refer to markings on the power terminal, load terminal, "L" wire, "N" wire, and grounding wire. 3. Position the dimming slider at the front or end; align the slider on the front cover accordingly. 4. Install the button spring above the button section on the circuit board. 5. Close the plastic front cover, install the back cover screws, and tighten to complete assembly. Ensure incoming and outgoing wire diameters are appropriate. Note: Do not connect to power until all installation steps are completed. Verify that your bulb is dimmable and within the specified power range. Product Name: Foot Operated LED Dimmer Color: Black Material: Plastic Package Contents: 1 x LED Dimmer (Other items not included) Note: Lighting and display differences may cause slight color variations between the image and actual item. Measurement error allowance: +/- 1-3 cm.