2PCS Flexible Steel Build Plate Magnetic Base for ANYCUBIC Photon/Photon S 5.5S LCD SLA Resin 3D Printer 135x80mm

₹2,149.00
+ ₹376.99 शिपिंग

2PCS Flexible Steel Build Plate Magnetic Base for ANYCUBIC Photon/Photon S 5.5S LCD SLA Resin 3D Printer 135x80mm

  • ब्रांड: Unbranded

2PCS Flexible Steel Build Plate Magnetic Base for ANYCUBIC Photon/Photon S 5.5S LCD SLA Resin 3D Printer 135x80mm

  • ब्रांड: Unbranded
RRP: ₹6,090.00
मूल्य: ₹2,149.00
आपकी बचत: ₹3,941.00 (64%)
द्वारा बेचा गया:
₹2,149.00
+ ₹376.99 शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

2PCS Flexible Steel Build Plate Magnetic Base for ANYCUBIC Photon/Photon S 5.5S LCD SLA Resin 3D Printer 135x80mm

Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints.Re-level the bed. Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference.The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform.The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base. The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.Fit for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/ Qidi Shadow 5.5S 3D PrinterSize: 135X80mmPackage includes: 2x flexible Steel Plate & 2x megnetic base sticker
  • Fruugo ID: 344204024-753733972
  • EAN: 6402402284103

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Please do it under the supervision of a professional

डिलीवरी और वापसी

24 घंटों के भीतर भेजा जाएगा

  • STANDARD: ₹376.99 - के बीच वितरण बुध 17 दिसंबर 2025–मंगल 23 दिसंबर 2025

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Xiamen Yuxin Network Technology Co.,Ltd
  • Xiamen Yuxin Network Technology Co.,Ltd
  • xiamenshisimingquqianpugongyeyuan NO.61 B21 1
  • XIAMEN
  • CN
  • 361001
  • 18675451149@163.com
  • 18675451149
  • https://www.fruugo.co.uk/yuxin-network-technology/m-21020

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • Spain
  • ES
  • 28947
  • successservice2@hotmail.com
  • 34910602659
  • https://www.fruugo.co.uk/yuxin-network-technology/m-21020