1. Comply with IEEE 802.3af Power over Ethernet (10/100Mbps Supported). Extender the range of PoE an additional 100 meters2. Automatically detects and protects PoE equipment from being damaged by incorrect installation. Plug-and Play no configuration required3. 2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.4. 2-Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other two for power output. Comply with 10/100BASE-TX,IEEE 802.3 af-PoE.5. Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets. Installed at hotels, schools, buildings, villages, etc. POE input: 1 RJ45 portPOE output: 2 RJ45 portPOE Pin Output: 1/2(+), 3/6(-); MAX Power 15WNetwork Medium: Cat5 or better UTP cables (less than 120m)Repeater Mode: Store and forwardMAC Address Table: 2KPacket Buffer Memory: 48 ByteSwitching Capacity: 1.0GbpsPoE Standard: IEEE 802.3afInput power: 13 WattsOutput power: 12.2 WattsInput voltage: 44-55V 0.5AOutput voltage: 44-55V 0.525APower Supply Type: 1/2+,3/6-,Mode A, End-SpanNetwork Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;Working temperature: -10c to 45cWorking Humidity: 5%-90%, No Condensationcolor:BlackMaterial:Plastic + Metalsize:88 x 43 x 22mm Package Contents:1 x 2 Port POE Extender Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allo