HDPE container net 3 x 7 m black, SKU: 144999

Old container nets are always tangled and of poor quality? Then our strong container net is the ideal solution to prevent your cargo from falling out on the container during transport. Made of 100% HDPE (high-density polyethylene), this durable cover net is both UV and weatherproof. Thanks to the brass eyelets, the net can also be securely attached to the container and keeps your loads in place. Colour: Black Material: 100% HDPE (high-density polyethylene)Density: 160 g / m²Size: 3 x 7 m (W x L)Fine meshWith brass eyeletsWind and water permeableMould and UV resistant, breathable HDPEMaterial: Polyethylene: 100% Attention Use only for covering The load height should not be higher than the container. Replacement criteria: The network is broken or has defects that would compromise safety. The instructions must be passed on to the end user together with the network. The material to be transported must be loaded onto the loading area and secured by the vehicle body. The trailer's cover net can then be stretched over the loading area so that it overlaps at the edges and no material can escape while driving, which could obstruct or endanger the following traffic. The trailer cover net is most effective when all the meshes are evenly tensioned and the net is connected to suitable attachment points on the open truck bed or container. Rinse the net with water. Nets must be monitored by visual inspection during use. Nets must be removed/replaced if defects are detected. Repairs may only be carried out by the manufacturer or a person authorized by him. It must be proven that this person has the necessary knowledge and skills. After repair work, the original properties of the net must be restored. In addition, nets should be inspected by a qualified person at least once a year. This review should be documented. In case of doubt, the networks in question should be withdrawn from circulation.